Serving Northern MN and WI. Family owned business with over 50 years of experience.
Our business is built on referrals.
All WELL DRILLING IS DONE PERSONALLY BY US!
We do not subcontract out our drilling!
Our 3 Methods of Drilling:
AIR DRIVEN: Our preferred method of drilling. Very Precise. Steel Casing is advanced as we drill. Small aquifers are easily found, and multiple aquifers can be tested as we drill. We have been using this method since the early 80's.
MUD ROTARY: Drilling mud is circulated to bring up drilling cuttings and stabilize the bore hole. Drillers must determine aquifer by looking at mud cuttings. Faster but less precise a larger hole is drilled to depth then casing is set in place and grouted. Typically casing is not moved once set and water can only be tested once casing is installed.
WE ONLY USE THIS METHOD WHEN NECCESSARY ON DEEP CASED WELLS OR GEO THERMAL WELLS WITH NO CASING.
DUAL ROTARY AIR: The newest method to our area. Similar to air driven wells , but casing is advanced by rotating simultaneously with the drill bit while the drill bit is 1" to 1 ft ahead of the casing. Water can be tested as we drill. There is no percussion so the ground is not disturbed. No stress on the casing. Casing can be moved up and down easily to find the best spot in an aquifer. Extremely Precise Casing can be drilled though extreme overburden straight.
WE NO LONGER DRILL 4' WELL DUE TO THE TROUBLE REMOVING STUCK SUBMERSIBLE PUMPS AND REDRILLING
We have 3 service truck ready to handle all types of repairs. From something as simple as a broken wire to installing a 200 hp submersible we have done it.
We typically have a same day turnaround on service calls and carry a large inventory of parts on hand.
We offer hydrofracking for slow production wells. We use 2 packer and also 2 large high pressure pumps to double the amount of water and pressure we can inject into the well to greatly help out with our return.
NEW TO THE AREA
The casing is advance by rotating it simultaneously with the drill bit.
Only drilling ahead of the casing a few inches to a ft. With no percussion makes it extremely precise and can find water in the smallest of water veins without destroying or disrupting them.
If you have a well that is not in use. It must be put in use or be sealed according to Minnesota Department of Health and WI DNR.
We can seal all types of wells and elevator shafts.
From a residental homes to an off the grid cabin we have all types of pumps and pumping options to fit your needs.
We are heading into our 3rd generation of water well drillers. Started in 1968 in Cromwell, MN. Then moved to Wrenshall, MN in 1977 where we are still located today.
We opened a second location in 2017 in Willow River, MN to better service our Pine County Customers.
Serving the same area for over 50 years
Many of our customers over the years have become our friends.
New water wells normally take 1 day to be completed. We typically have a same day turnaround on all service calls.
We pride ourselves with our quality of work. Our name is on our truck so our reputation means everything to us. Our path to success has been referrals.
We stand by our work.
All our wells have warranties varying from 1-5 years.
Kentwellco@aol.com OR Call (218)384-9778 CHECK OUT OUR OTHER SITE AT WWW.MNWELLDRILLING.COM
Wrenshall, Carlton, Moose lake, Barnum, Sturgeon Lake, Willow River, Rutledge, Denham, Mahtowa, Kettle River, Floodwood, Tamarack, Wright, Cromwell, Holyoke, Nickerson, Kerrick, Bruno, Askov, Sandstone, Finlayson, Hinckley, Brook Park, Henriette, Pine City, Rock Creek, Duluth, Esko, Cloquet, Brookston, Cotton, Twig, Hermantown, Proctor, Two Harbors, Superior, Oliver, Poplar, Maple, Lake Nebagamon, Iron River, Port Wing, Solon Springs, South Range, Foxboro, Danbury, Wascott, Gordon,
Carlton, Pine, St, Louis, Atkin, Lake, Counties in MN
Douglas, Bayfield, Burnett, in WI
Copyright © 2018 Kent well drilling - All Rights Reserved.